SDSHobby
AP640 BALANCE CHARGER OUTPUT 20A/50W
Specifications:, DC Input Voltage Range:, 11.0-32.0V, Input Charge Current Range:, 0.1-40.0A, Charge Power Limited:, max. 1000W, Output Discharge Current Range:, 0.1-20.0A, Discharge Power Limited:, max. 50W, Energy Transfer Discharge:, max. 1000W, Balance Socket Charge Current:, 1.0A, Balance Tolerance:, ±, Ni-Cd/Ni-MH Battery Cell Count:, 1-18S, Lithium Battery Types:, LiPo, Li-ion, Li-Fe, Lithium Battery Cell Count:, 1-6 series, Pb Battery Voltage:, .0-20.0V, Digital Power:, 3.0-24.0V, Operational System:, graphical display,
0.01VSDSHobby
AK610 BALANCE CHARGER AC 220V/OUTPUT 5A 10W WITH INTERNAL ADAPTER
Specifications:, AC Input Voltage Range:, 20-240V, DC Input Voltage Range:, 11-18V, Input Charge Current Range:, 0.1A-10A, Output Discharge Current Range:, 0.1A-5A, Charge Power Limited:, max. 80W, Discharge Power Limited:, max. 10W, Balance Current:, max. 250mA, Balance Tolerance:, ±, Ni-Cd/Ni-MH Battery Cell Count:, 1-16S, Lithium Battery Types:, LiPo, Li-ion, Li-Fe, Lithium Battery Cell Count:, 1-6 series, Pb Battery Voltage:, -20V, Digital Power:, 3-24V, Operational System:, graphical display,
0.01VSDSHobby
AK610 BALANCE CHARGER AC 110V/OUTPUT 5A 10W WITH INTERNAL ADAPTER
Specifications:, AC Input Voltage Range:, 110-120V, DC Input Voltage Range:, 11-18V, Input Charge Current Range:, 0.1A-10A, Output Discharge Current Range:, 0.1A-5A, Charge Power Limited:, max. 80W, Discharge Power Limited:, max. 10W, Balance Current:, max. 250mA, Balance Tolerance:, ±, Ni-Cd/Ni-MH Battery Cell Count:, 1-16S, Lithium Battery Types:, LiPo, Li-ion, Li-Fe, Lithium Battery Cell Count:, 1-6 series, Pb Battery Voltage:, -20V, Digital Power:, 3-24V, Operational System:, graphical display,
0.01VSDSHobby
HOBBYWING PLATINUM SERIES ESC 30A-PRO FOR RC MULTICOPTER
Specifications:, , Const. Current:, 30A, Burst Current:, 45A (10s), Max. RPM:, 10000 rpm/min (2 poles), 70000 rpm/min (6 poles), 35000rpm/min (12 poles), BEC Output:, None, Input Power:, -6S Lithium, 5-18S Ni-MH, User Programmable:, yes, Weight:, 31.6g, Dimension:, 56.5*25.6*8mm, Features:, Start-up Mode:, Normal/Soft/ Super Soft, compatible with airplanes and helicopters, Full protection:, Low Voltage Protection, Signal Losing Protection, Over Voltage Protection, Low Voltage Protection,
Microprocessor uses separate voltage regulator IC, with good anti-jamming capability. ...SDSHobby
HOBBYWING EZRUN BRUSHLESS SYSTEM COMBO (120A ESC +KV4000 MOTOR +PROGRAM CARD) FOR 1/10 SCT/SCALE SHORT COURSE TRUCK
| Output Current | Continuous 120A, burst 760A |
| Input | 6-12 cells Ni-MH/NiCd or 2-4S Lipo |
| BEC Output | 6V/3A (Switching mode)* Note #1 |
| Resistance | 0.0004 Ohm |
| Motor Supported | Sensorless Brushless Motor |
| With 6 cells Ni-MH/NiCd or 2S Lipo | KV≤6000; |
| With 7-9 cells Ni-MH /NiCd or 3S Lipo | KV≤4000; |
| With 10-12 cells Ni-MH /NiCd or 4S Lipo | KV≤3000; |
| Suitable Car | 1/10 4WD SCT, 1/8 2WD and 4WD buggy/SCT (Include TRAXXAS 1/10 SCT) |
| Size | 59mm (L) * 38mm (W) * 34mm (H) |
| Weight | 113g |
| * Note #1 | The cooling fan of EZRUN-WP-SC8 is powered by the built-in BEC. |
| KV VALUE | KV4000 |
| Motor Diameter | 36mm |
| Motor Length | 56mm |
| Extended Shaft Diameter | 3.17mm |
| Extended Shaft Length | 18mm |
| Connector Type | 4.0mm Banana Connector |
| Voltage | 7.4V (2S LiPo) |
| Weight | 210g |
| Size | 88mm (L) *58mm (W) *14mm (H) |
| Weight | 40g |
EZRUN-WP-SC8 Water-proof ESC:, Suitable Brushless Motor:, Rotor Pole: 4, Program Card:, Input Voltage: 4.8V—6.0V(Battery Pack is needed to supply power for program card, only if the ESC without BEC output.), Programmable Items:, Running Mode,
EZRUN Brushless Sensorless Motor 3656/ KV4000 : Drag Brake Force ...SDSHobby
HOBBYWING EZRUN BRUSHLESS SYSTEM COMBO (120A ESC +KV4700 MOTOR +PROGRAM CARD) FOR 1/10 SCT/SCALE SHORT COURSE TRUCK
| Output Current | Continuous 120A, burst 760A |
| Input | 6-12 cells Ni-MH/NiCd or 2-4S Lipo |
| BEC Output | 6V/3A (Switching mode)* Note #1 |
| Resistance | 0.0004 Ohm |
| Motor Supported | Sensorless Brushless Motor |
| With 6 cells Ni-MH/NiCd or 2S Lipo | KV≤6000; |
| With 7-9 cells Ni-MH /NiCd or 3S Lipo | KV≤4000; |
| With 10-12 cells Ni-MH /NiCd or 4S Lipo | KV≤3000; |
| Suitable Car | 1/10 4WD SCT, 1/8 2WD and 4WD buggy/SCT (Include TRAXXAS 1/10 SCT) |
| Size | 59mm (L) * 38mm (W) * 34mm (H) |
| Weight | 113g |
| * Note #1 | The cooling fan of EZRUN-WP-SC8 is powered by the built-in BEC. |
| KV VALUE | KV4700 |
| Motor Diameter | 36mm |
| Motor Length | 56mm |
| Extended Shaft Diameter | 3.17mm |
| Extended Shaft Length | 18mm |
| Connector Type | 4.0mm Banana Connector |
| Voltage | 7.4V (2S LiPo) |
| Weight | 205g |
| Size | 88mm (L) *58mm (W) *14mm (H) |
| Weight | 40g |
EZRUN-WP-SC8 Water-proof ESC:, Suitable Brushless Motor:, Rotor Pole: 4, Program Card:, Input Voltage: 4.8V—6.0V(Battery Pack is needed to supply power for program card, only if the ESC without BEC output.), Programmable Items:, Running Mode,
EZRUN Brushless Sensorless Motor 3656/ KV4700 : Drag Brake Force ...SDSHobby
HOBBYWING EZRUN BRUSHLESS SYSTEM COMBO (120A ESC +KV2000 MOTOR +PROGRAM CARD) FOR 1/10 SCT/SCALE SHORT COURSE TRUCK
| Output Current | Continuous 120A, burst 760A |
| Input | 6-12 cells Ni-MH/NiCd or 2-4S Lipo |
| BEC Output | 6V/3A (Switching mode)* Note #1 |
| Resistance | 0.0004 Ohm |
| Motor Supported | Sensorless Brushless Motor |
| With 6 cells Ni-MH/NiCd or 2S Lipo | KV≤6000; |
| With 7-9 cells Ni-MH /NiCd or 3S Lipo | KV≤4000; |
| With 10-12 cells Ni-MH /NiCd or 4S Lipo | KV≤3000; |
| Suitable Car | 1/10 4WD SCT, 1/8 2WD and 4WD buggy/SCT (Include TRAXXAS 1/10 SCT) |
| Size | 59mm (L) * 38mm (W) * 34mm (H) |
| Weight | 113g |
| * Note #1 | The cooling fan of EZRUN-WP-SC8 is powered by the built-in BEC. |
| KV VALUE | KV2000 |
| Motor Diameter | 42mm |
| Motor Length | 74mm |
| Extended Shaft Diameter | 3.17mm |
| Extended Shaft Length | 18mm |
| Connector Type | 4.0mm Banana Connector |
| Voltage | 7.4V (2S LiPo) |
| Size | 88mm (L) *58mm (W) *14mm (H) |
| Weight | 40g |
EZRUN-WP-SC8 Water-proof ESC:, Suitable Brushless Motor:, Rotor Pole: 4, Program Card:, Input Voltage: 4.8V—6.0V(Battery Pack is needed to supply power for program card, only if the ESC without BEC output.), Programmable Items:, Running Mode,
EZRUN Brushless Sensorless Motor 4274/ KV2000 : Drag Brake Force ...SDSHobby
HOBBYWING EZRUN BRUSHLESS SYSTEM COMBO (120A ESC +KV3400 MOTOR +PROGRAM CARD) FOR 1/10 SCT/SCALE SHORT COURSE TRUCK
| Output Current | Continuous 120A, burst 760A |
| Input | 6-12 cells Ni-MH/NiCd or 2-4S Lipo |
| BEC Output | 6V/3A (Switching mode)* Note #1 |
| Resistance | 0.0004 Ohm |
| Motor Supported | Sensorless Brushless Motor |
| With 6 cells Ni-MH/NiCd or 2S Lipo | KV≤6000; |
| With 7-9 cells Ni-MH /NiCd or 3S Lipo | KV≤4000; |
| With 10-12 cells Ni-MH /NiCd or 4S Lipo | KV≤3000; |
| Suitable Car | 1/10 4WD SCT, 1/8 2WD and 4WD buggy/SCT (Include TRAXXAS 1/10 SCT) |
| Size | 59mm (L) * 38mm (W) * 34mm (H) |
| Weight | 113g |
| * Note #1 | The cooling fan of EZRUN-WP-SC8 is powered by the built-in BEC. |
| KV Value | KV3400 |
| Motor Diameter | 36mm |
| Motor Length | 56mm |
| Extended Shaft Diameter | 3.17mm |
| Extended Shaft Length | 18mm |
| Connector Type | 4.0mm Banana Connector |
| Voltage | 7.4V (2S LiPo) |
| Weight | 210g |
| Size | 88mm (L) *58mm (W) *14mm (H) |
| Weight | 40g |
EZRUN-WP-SC8 Water-proof ESC:, Suitable Brushless Motor:, Rotor Pole: 4, Program Card:, Input Voltage: 4.8V—6.0V(Battery Pack is needed to supply power for program card, only if the ESC without BEC output.), Programmable Items:, Running Mode,
EZRUN Brushless Sensorless Motor 3656/ KV3400 : Drag Brake Force ...SDSHobby
LEOPARD 4 POLES 1300KV BRUSHLESS INRUNNER MOTOR LBP3674-5D FOR RC CAR AND BOAT
Specifications:, Max Current:, 56A, Max Voltage:, 44V, Max Power:, 400W, KV Value:, 1300KV, Resistance:, 0.0175, :, 1.6A, Motor Diameter* Length (mm):, Φ, Installation Hole Depth:, 6mm, Extended Shaft Length (mm):, 0mm, Extended Shaft Diameter (mm):, Φ, Weight:, 315g,
No Load Current ( 7.4V ) 36×74 5.0SDSHobby
LEOPARD 4 POLES 1650KV BRUSHLESS INRUNNER MOTOR LBP3674-4D FOR RC CAR AND BOAT
Specifications:, Max Current:, 70A, Max Voltage:, 35V, Max Power:, 400W, KV Value:, 1650KV, Resistance:, 0.0115, :, 1.8A, Motor Diameter* Length (mm):, Φ, Installation Hole Depth:, 6mm, Extended Shaft Length (mm):, 0mm, Extended Shaft Diameter (mm):, Φ, Weight:, 315g,
No Load Current ( 7.4V ) 36×74 5.0SDSHobby
LEOPARD 4 POLES 1900KV BRUSHLESS INRUNNER MOTOR LBP3674-3.5D FOR RC CAR AND BOAT
Specifications:, Max Current:, 78A, Max Voltage:, 31V, Max Power:, 400W, KV Value:, 1900KV, Resistance:, 0.0104, :, .2A, Motor Diameter* Length (mm):, Φ, Installation Hole Depth:, 6mm, Extended Shaft Length (mm):, 0mm, Extended Shaft Diameter (mm):, Φ, Weight:, 315g,
No Load Current ( 7.4V ) 36×74 5.0SDSHobby
LEOPARD 4 POLES 2200KV BRUSHLESS INRUNNER MOTOR LBP3674-3D FOR RC CAR AND BOAT
Specifications:, Max Current:, 90A, Max Voltage:, 7V, Max Power:, 400W, KV Value:, 200KV, Resistance:, 0.0066, :, .7A, Motor Diameter* Length (mm):, Φ, Installation Hole Depth:, 6mm, Extended Shaft Length (mm):, 0mm, Extended Shaft Diameter (mm):, Φ, Weight:, 315g,
No Load Current ( 7.4V ) 36×74 5.0SDSHobby
LEOPARD 4 POLES 2650KV BRUSHLESS INRUNNER MOTOR LBP3674-2.5D FOR RC CAR AND BOAT
Specifications:, Max Current:, 110A, Max Voltage:, 2V, Max Power:, 400W, KV Value:, 650KV, Resistance:, 0.0060, :, 3.1A, Motor Diameter* Length (mm):, Φ, Installation Hole Depth:, 6mm, Extended Shaft Length (mm):, 0mm, Extended Shaft Diameter (mm):, Φ, Weight:, 315g,
No Load Current ( 7.4V ) 36×74 5.0SDSHobby
LEOPARD 4 POLES 3270KV BRUSHLESS INRUNNER MOTOR LBP3674-2D FOR RC CAR AND BOAT
Specifications:, Max Current:, 135A, Max Voltage:, 18V, Max Power:, 400W, KV Value:, 3270KV, Resistance:, 0.0033, :, 4.5A, Motor Diameter* Length (mm):, Φ, Installation Hole Depth:, 6mm, Extended Shaft Length (mm):, 0mm, Extended Shaft Diameter (mm):, Φ, Weight:, 315g,
No Load Current ( 7.4V ) 36×74 5.0SDSHobby
LEOPARD 4 POLES 2100KV BRUSHLESS INRUNNER MOTOR LBP3665-2Y FOR RC CAR AND BOAT
Specifications:, Max Current:, 72A, Max Voltage:, 8V, Max Power:, 000W, KV Value:, 100KV, Resistance:, 0.0075, :, .5A, Motor Diameter* Length (mm):, Φ, Installation Hole Depth:, 6mm, Extended Shaft Length (mm):, 16mm, Extended Shaft Diameter (mm):, Φ, Weight:, 82g,
No Load Current ( 7.4V ) 36×65 5.0